|
Hex |
Decimal |
Error Description |
|
$258 |
600 |
An operation is pending. |
|
$259 |
601 |
The port handle is invalid. |
|
$25A |
602 |
The port is already open. |
|
$25B |
603 |
Caller's buffer is too small. |
|
$25C |
604 |
Wrong information specified. |
|
$25D |
605 |
Cannot set port information. |
|
$25E |
606 |
The port is not connected. |
|
$25F |
607 |
The event is invalid. |
|
$260 |
608 |
The device does not exist. |
|
$261 |
609 |
The device type does not exist. |
|
$262 |
610 |
The buffer is invalid. |
|
$263 |
611 |
The route is not available. |
|
$264 |
612 |
The route is not allocated. |
|
$265 |
613 |
Invalid compression specified. |
|
$266 |
614 |
Out of buffers. |
|
$267 |
615 |
The port was not found. |
|
$268 |
616 |
An asynchronous request is pending. |
|
$269 |
617 |
The port or device is already disconnecting. |
|
$26A |
618 |
The port is not open. |
|
$26B |
619 |
The port is disconnected. |
|
$26C |
620 |
There are no endpoints. |
|
$26D |
621 |
Cannot open the phone book file. |
|
$26E |
622 |
Cannot load the phone book file. |
|
$26F |
623 |
Cannot find the phone book entry. |
|
$270 |
624 |
Cannot write the phone book file. |
|
$271 |
625 |
Invalid information found in the phone book. |
|
$272 |
626 |
Cannot load a string. |
|
$273 |
627 |
Cannot find key. |
|
$274 |
628 |
The port was disconnected. |
|
$275 |
629 |
The port was disconnected by the remote machine. |
|
$276 |
630 |
The port was disconnected due to hardware failure. |
|
$277 |
631 |
The port was disconnected by the user. |
|
$278 |
632 |
The structure size is incorrect. |
|
$279 |
633 |
The port is already in use or is not configured for Remote Access dialout. |
|
$27A |
634 |
Cannot register your computer on the remote network. |
|
$27B |
635 |
Unknown error. |
|
$27C |
636 |
The wrong device is attached to the port. |
|
$27D |
637 |
The string could not be converted. |
|
$27E |
638 |
The request has timed out. |
|
$27F |
639 |
No asynchronous net available. |
|
$280 |
640 |
A NetBIOS error has occurred. |
|
$281 |
641 |
The server cannot allocate NetBIOS resources needed to support the client. |
|
$282 |
642 |
One of your NetBIOS names is already registered on the remote network. |
|
$283 |
643 |
A network adapter at the server failed. |
|
$284 |
644 |
You will not receive network message popups. |
|
$285 |
645 |
Internal authentication error. |
|
$286 |
646 |
The account is not permitted to log on at this time of day. |
|
$287 |
647 |
The account is disabled. |
|
$288 |
648 |
The password has expired. |
|
$289 |
649 |
The account does not have Remote Access permission. |
|
$28A |
650 |
The Remote Access server is not responding. |
|
$28B |
651 |
Your modem (or other connecting device) has reported an error. |
|
$28C |
652 |
Unrecognized response from the device. |
|
$28D |
653 |
A macro required by the device was not found in the device .INF file section. |
|
$28E |
654 |
A command or response in the device .INF file section refers to an undefined macro |
|
$28F |
655 |
The <message> macro was not found in the device .INF file section. |
|
$290 |
656 |
The <defaultoff> macro in the device .INF file section contains an undefined macro |
|
$291 |
657 |
The device .INF file could not be opened. |
|
$292 |
658 |
The device name in the device .INF or media .INI file is too long. |
|
$293 |
659 |
The media .INI file refers to an unknown device name. |
|
$294 |
660 |
The device .INF file contains no responses for the command. |
|
$295 |
661 |
The device .INF file is missing a command. |
|
$296 |
662 |
Attempted to set a macro not listed in device .INF file section. |
|
$297 |
663 |
The media .INI file refers to an unknown device type. |
|
$298 |
664 |
Cannot allocate memory. |
|
$299 |
665 |
The port is not configured for Remote Access. |
|
$29A |
666 |
Your modem (or other connecting device) is not functioning. |
|
$29B |
667 |
Cannot read the media .INI file. |
|
$29C |
668 |
The connection dropped. |
|
$29D |
669 |
The usage parameter in the media .INI file is invalid. |
|
$29E |
670 |
Cannot read the section name from the media .INI file. |
|
$29F |
671 |
Cannot read the device type from the media .INI file. |
|
$2A0 |
672 |
Cannot read the device name from the media .INI file. |
|
$2A1 |
673 |
Cannot read the usage from the media .INI file. |
|
$2A2 |
674 |
Cannot read the maximum connection BPS rate from the media .INI file. |
|
$2A3 |
675 |
Cannot read the maximum carrier BPS rate from the media .INI file. |
|
$2A4 |
676 |
The line is busy. |
|
$2A5 |
677 |
A person answered instead of a modem. |
|
$2A6 |
678 |
There is no answer. |
|
$2A7 |
679 |
Cannot detect carrier. |
|
$2A8 |
680 |
There is no dial tone. |
|
$2A9 |
681 |
General error reported by device. |
|
$2AA |
682 |
ERROR WRITING SECTIONNAME |
|
$2AB |
683 |
ERROR WRITING DEVICETYPE |
|
$2AC |
684 |
ERROR WRITING DEVICENAME |
|
$2AD |
685 |
ERROR WRITING MAXCONNECTBPS |
|
$2AE |
686 |
ERROR WRITING MAXCARRIERBPS |
|
$2AF |
687 |
ERROR WRITING USAGE |
|
$2B0 |
688 |
ERROR WRITING DEFAULTOFF |
|
$2B1 |
689 |
ERROR READING DEFAULTOFF |
|
$2B2 |
690 |
ERROR EMPTY INI FILE |
|
$2B3 |
691 |
Access denied because username and/or password is invalid on the domain. |
|
$2B4 |
692 |
Hardware failure in port or attached device. |
|
$2B5 |
693 |
ERROR NOT BINARY MACRO |
|
$2B6 |
694 |
ERROR DCB NOT FOUND |
|
$2B7 |
695 |
ERROR STATE MACHINES NOT STARTED |
|
$2B8 |
696 |
ERROR STATE MACHINES ALREADY STARTED |
|
$2B9 |
697 |
ERROR PARTIAL RESPONSE LOOPING |
|
$2BA |
698 |
A response keyname in the device .INF file is not in the expected format. |
|
$2BB |
699 |
The device response caused buffer overflow. |
|
$2BC |
700 |
The expanded command in the device .INF file is too long. |
|
$2BD |
701 |
The device moved to a BPS rate not supported by the COM driver. |
|
$2BE |
702 |
Device response received when none expected. |
|
$2BF |
703 |
ERROR INTERACTIVE MODE |
|
$2C0 |
704 |
ERROR BAD CALLBACK NUMBER |
|
$2C1 |
705 |
ERROR INVALID AUTH STATE |
|
$2C2 |
706 |
ERROR WRITING INITBPS |
|
$2C3 |
707 |
X.25 diagnostic indication. |
|
$2C4 |
708 |
The account has expired. |
|
$2C5 |
709 |
Error changing password on domain. |
|
$2C6 |
710 |
Serial overrun errors were detected while communicating with your modem. |
|
$2C7 |
711 |
RasMan initialization failure. Check the event log. |
|
$2C8 |
712 |
Biplex port is initializing. Wait a few seconds and redial. |
|
$2C9 |
713 |
No active ISDN lines are available. |
|
$2CA |
714 |
Not enough ISDN channels are available to make the call. |
|
$2CB |
715 |
Too many errors occurred because of poor phone line quality. |
|
$2CC |
716 |
The Remote Access IP configuration is unusable. |
|
$2CD |
717 |
No IP addresses are available in the static pool of Remote Access IP addresses. |
|
$2CE |
718 |
PPP timeout. |
|
$2CF |
719 |
PPP terminated by remote machine. |
|
$2D0 |
720 |
No PPP control protocols configured. |
|
$2D1 |
721 |
Remote PPP peer is not responding. |
|
$2D2 |
722 |
The PPP packet is invalid. |
|
$2D3 |
723 |
The phone number, including prefix and suffix, is too long. |
|
$2D4 |
724 |
The IPX protocol cannot dial-out on the port because the computer is an IPX router. |
|
$2D5 |
725 |
The IPX protocol cannot dial-in on the port because the IPX router is not installed.. |
|
$2D6 |
726 |
The IPX protocol cannot be used for dial-out on more than one port at a time. |
|
$2D7 |
727 |
Cannot access TCPCFG.DLL. |
|
$2D8 |
728 |
Cannot find an IP adapter bound to Remote Access. |
|
$2D9 |
729 |
SLIP cannot be used unless the IP protocol is installed. |
|
$2DA |
730 |
Computer registration is not complete. |
|
$2DB |
731 |
The protocol is not configured. |
|
$2DC |
732 |
The PPP negotiation is not converging. |
|
$2DD |
733 |
The PPP control protocol for this network protocol is not available on the server. |
|
$2DE |
734 |
The PPP link control protocol terminated.. |
|
$2DF |
735 |
The requested address was rejected by the server.. |
|
$2E0 |
736 |
The remote computer terminated the control protocol. |
|
$2E1 |
737 |
Loopback detected.. |
|
$2E2 |
738 |
The server did not assign an address. |
|
$2E3 |
739 |
The remote server cannot use the Windows NT encrypted password. |
|
$2E4 |
740 |
The TAPI devices configured for Remote Access failed to initialize or were not installed correctly. |
|
$2E5 |
741 |
The local computer does not support encryption. |
|
$2E6 |
742 |
The remote server does not support encryption. |
|
$2E7 |
743 |
The remote server requires encryption. |
|
$2E8 |
744 |
Cannot use the IPX net number assigned by the remote server. Check the event log. |
|
$2F0 |
752 |
A syntax error was encountered while processing a script. |
